Analytik Jena CyBio Well vario OL3381-25-300, Operating Manual

Page: 75 / 164

CyBio
®
Well vario Release: 2017 59
Operation
7 Operation
7.1 Turning the CyBio
®
Well vario On
To turn the CyBio
®
Well vario on, proceed as follows:
1. Check that CyBio
®
Well vario power cord is correctly connected to the line power
supply point.
2. For operation with a capillary head, check for proper setting of compressed air
supply. Having installed the capillary head, connect the head's compressed air
supply tube to its terminal point at the compressed air control unit
3. Transfer power on/off switch on the front panel (for front-side head replacement
version) or the rear wall panel (for rear-side head replacement version) into posi-
tion "I" (
→
see fig. 28 and
→
Fig. 29 ).

Once power is available, the CyBio
®
Well vario is ready for action and
can be operated in manual control or computer control mode.
Fig. 28: Power on/off switch on front panel
Fig. 29: Power on/off switch on rear panel