Safety instructions
Biometra TOne
6
Version 01.21
2
Safety instructions
2.1
General notes
For your own safety and to ensure error-free and safe operation of Biometra TOne,
please read this chapter carefully before commissioning.
Besides the safety instructions in the operating manual and the local safety regulations
that apply to the operation of the device, the general applicable regulations regarding
accident prevention, occupational health and safety, and environmental protection have
to be observed and complied with.
References to potential hazards do not replace the work protection regulations which
must be observed.
2.2
Safety markings on Biometra TOne
Damaged or missing safety symbols can cause incorrect actions leading to personal in-
jury or material damage. Do not remove safety symbols! Replace damaged safety sym-
bols immediately!
The following safety symbols are attached to the inside of the heated lid and the rear of
the device:
Symbol
Meaning
Notes
Caution!
Hazard point
This symbol is located on the inside of the heated lid and on
the rear of the device.
Proceed with due care when handling samples and working
with Biometra TOne.
Caution!
Risk of burns
This symbol is located on the inside of the heated lid and on
the rear of the device.
There is a risk of burning at the heated lid, the thermal block,
the samples, and the rear of the device.
Ensure ventilation slots are
unobstructed
This sign is attached to the underside of the device.
Ensure that the ventilation slots on the underside and at the
rear of the device are unobstructed. Make sure that there are
no objects underneath the device (e.g., paper) that may be
sucked against the ventilation slot and thus interfere with
ventilation.
2.3
Technical condition
Biometra TOne has been built and certified according to safety standard EN 61010-1.
Do not modify the device in any way. Any modification made to the device will lead to a
loss of warranty and the EN 61010-1 certificate and poses a potential risk.
