Analytic Systems PWI320 Installation & Operation Manual Download Page 4

4

GROUNDING AND AC POWER CORD CONNECTION INSTRUCTIONS

The plug must be plugged into an outlet that is properly installed and grounded in 

accordance with all local codes and ordinances.

DANGER 

Never alter the AC power cord or plug provided. If it will not fit 

the output, use an approved adapter or have the proper AC power cord 

installed by a qualified electrician. Improper connection can result in the 

risk of electric shock.

Medical Equipment Notice

Analytic Systems does not recommend the use of the PWI Series Power Supplies in 

life support applications where failure or malfunction of this product can be reasonably 

expected to cause failure of the life support device or to significantly affect its safety 

or effectiveness. Analytic Systems does not recommend the use of any of its products 

in direct patient care. Examples of devices considered to be life support devices are: 

neonatal oxygen analyzers, nerve stimulators (whether used for anesthesia, pain relief, 

or other purposes), auto-transfusion devices, blood pumps, defibrillators, arrhythmia 

detectors and alarms, pacemakers, hemodialysis systems, peritoneal dialysis systems, 

neonatal ventilator incubators, ventilators for both adults and infants, anesthesia 

ventilators, and infusion pumps as well as any other devices designated as “critical” by 

the U.S. FDA.

WARNING 

Do not connect a power supply to a battery. It does not have the circuitry or 

programming to properly charge a battery. Both the power supply and the battery could be 

damaged or destroyed!

Summary of Contents for PWI320

















Reviews: