Analytic Systems IBC320, Installation & Operation Manual, Page: 18 / 24

18
laptop and using the Power Wizard program to see if a more detail error message is there
No Battery
If the charger is turned on without a battery connected, it will show this display. Simply
connect a battery to clear this fault. If a battery IS connected and you see this fault, it usually
means the battery is completely discharged. Try switching the charger to Power Supply mode
for a few minutes and then back to Charger mode to see if the battery will return to life. If it
doesn’t, the battery is defective and will have to be replaced.
Charger in wrong mode
The charger may be in Power Supply mode instead of Battery Charger mode. Make sure the
charger is in the Battery Charging mode by pressing the Power button for 3 seconds until you
hear 1 beep. If you hear 2 beeps, repeat until you hear 1 beep.
FAULT INDICATORS
BATTERY OVERTEMP BATTERY LO VOLTAGE
BATTERY FAILED CHARGER OVERTEMP
CHARGER FAILED
POL
POL
POL
POL
POL
AC
AC
AC
AC
AC
TEMP
TEMP
TEMP
TEMP
TEMP
DEV
DEV
DEV
DEV
DEV
SVC
SVC
SVC
SVC
SVC
FLT
FLT
FLT
FLT
FLT
LO V
LO V
LO V
LO V
LO V
BAT
BAT
BAT
BAT
BAT
EQ
PS
EQ
PS
EQ
PS
EQ
PS
EQ
PS
CH
CH
CH
CH
CH
25
25
25
25
25
50
50
50
50
50
75
75
75
75
75
CHARGER LO INPUT VOLTS
POL
AC
TEMP
DEV
SVC
FLT
LO V
BAT
EQ
PS
CH
25 50 75
NO BATTERY
POL
AC TEMP
DEV
SVC
FLT
LO V
BAT
EQ
PS
CH
25 50 75
BLINKING