Safety instructions
10
Edition 06/2015
InnuPure C16
3.3
Safety markings on the InnuPure C16
Safety and notice symbols have been attached to the InnuPure C16 whose content must
always be observed.
Damaged or missing safety and notice symbols can cause incorrect actions leading to per-
sonal injury or material damage! The symbol labels must not be removed! Damaged symbol
labels must be replaced without delay!
Figure 1 Safety symbols at the front and rear of the InnuPure C16
Warning sym-
bol
Meaning
Remark
Warning against a hazard
location
Warning against mechanical danger from
moving equipment parts
Biological hazard
Warning against damage from biological sub-
stances Observe the corresponding protection
instructions!
Reaching inside the de-
vice prohibited during
operation
Warning against crushing by moving parts.
Notice symbol Meaning
Remark
Always disconnect the
plug from the power sup-
ply before opening the
device
Before opening the device:
Switch off the device and disconnect the
mains plug from the mains socket and the de-
vice.
Observe the instructions
for use.
Read the instructions for use before com-
mencing work.
WEEE identification of
electrical and electronic
equipment
The device must be disposed of separately
from household waste as electrical and elec-
tronic waste after its useful life has expired.
2x4 AT, 250V
Identification of the inter-
nal fuse
Only use the specified fuses!
