Analogue Solution – Telemark-k – 2012
14 |
P a g e
Rear Panel Audio Connections
CV IN:
This is a pitch CV input socket if you
want to control Telemark-K’s pitch from an
external synth. Scaling is 1v/Oct
CV2 IN:
This is a CV input socket if you want
to control Telemark-k's the 'CV2' patch points
(selected via the rotary switches) using an
external synth.
GATE IN:
This is a Gate input socket if you
want to trigger the 2 envelope generators via an
external synth. Triggering is positive 5v or more
signal.
CV Out:
The pitch CV signal is fed out here
from the MIDI to CV converter
CV2 Out:
The aux/controller CV signal is fed
out here from the MIDI to CV converter
GATE Out:
The gate signal is fed out here
from the MIDI to CV converter
HEADPHONE:
The signal is mono. Level is
controlled together with the main output socket
level using the volume control on the front panel
EXT1 IN:
This is the input socket to feed audio
or control voltage signals into Telemark. The
signal is routed to all the EXT1 modulation points,
selected via the top panel switches. EXT1 is also
available at the mixer to allow external audio
signals to be filtered.
EXT2 IN:
This a second input socket to feed
audio signals into the synth. The signal is routed
to the EXT audio input of the mixer.
VCA OUT:
This is the main audio output from
Telemark it is the signal output from the VCA,
post Volume control.
MIDI IN:
Plug your MIDI cable in here to all
another MIDI device to control the Telemark
MIDI THRU:
The MIDI data coming into the In
socket is copied to the Thru socket. This is so you
can control additional devices from your MIDI
controller without the need of a MIDI thru box.
The Thru socket will not function when in Poly
mode.
MIDI OUT:
Use this socket to allow the
Telemark to control other MIDI devices or use it
as a master keyboard in your MIDI setup.
Summary of Contents for Telemark-k
Page 1: ...User Manual...
