Analogue Solutions Telemark-k, User Manual

Page: 13 / 22

Analogue Solution – Telemark-k – 2012
13 | P a g e
Pitch Bend and Mod Wheel

PITCH BEND WHEEL
Pitch Bend range can be set via the LCD display. Default value is usually set to +/-2 semitones. The Pitch
Bend MIDI data is sent to the MIDI OUT socket and will also control the on board MIDI to CV converter to
affect the pitch of both VCOs equally.

MOD WHEEL
The mod wheel will send MIDI controller one data to the MIDI Out socket. CV2 can be set to be
modulated my any controller, therefore can be set to one to be controlled by the mod wheel.
The actual analogue voltage (not the digital MIDI data) can also be used as a Mod source to control the
pitch of VCO1 and VCO2, or the cut-off level of the filter, via the LEVEL controls in the PERFORMANCE
section.

