Leipzig-v3 User Manual
EG1 & EG2 - ENVELOPE GENERATORS
Envelopes are modulation signals that you trigger and then they evolve over time.
Typically used to change the volume or filter cutoff, though they can also be used to
modulate the VCO pulse widths or pitch.
Both envelopes are identical, so only one will be described!
ATTACK
This controls how low the EG takes to reach
maximum level once triggered.
DECAY
After reaching maximum level following the
Attach stage, Decay sets the time taken to
reach the level set by Sustain.
SUSTAIN
Once the Attack and Decay stages have
passed, Sustain sets the level that the EG will
hold its output at for as long as a key is held
down.
RELEASE
Once the key is released, this sets the time
take for the signal to fade to zero.
18
