HD SCAN™
PAGE 9
Chapter 5 : LCD SCREEN DESCRIPTION
5-1. INTRODUCTION
The LCD screen is composed of 2 modes: the STATUS MODE and the CONTROL MODE.
•
The STATUS MODE indicates the input and output status of the HD SCAN
™
.
•
The CONTROL MODE allows to select and adjust the parameters of the HD SCAN
™
.
5-2. LCD CONTROL BUTTONS
The LCD screen is controlled by 3 buttons:
CONTROL
knob:
To scroll thru the different menus.
EXIT
/
MENU
button:
•
From the STATUS MODE, press this button to display the CONTROL MODE.
•
From the CONTROL MODE, press this button to:
- return to the previous menu,
- return to the STATUS MODE (press several times),
- return without safeguarding the item.
ENTER
button:
•
From the STATUS MODE, press this button to return to the last consulted menu.
•
From the CONTROL MODE, press this button to confirm a selected item.
NOTE
: When entering in the CONTROL MODE, the LCD window will automatically display the STATUS MODE
after 60 seconds of inactivity of the front panel buttons.
5-3. STATUS MODE
When switching ON, the LCD SCREEN shows the product's name and reference as follows:
c
HD SCAN
STATUS MENU
d
XTD920-HDDG
OUTPUT
1080i
f
STATUS MENU
e
internal
60
Hz
g
INPUT SVGA
h
STATUS MENU
GENLOCK
none
i
c
Product reference.
d
Product designation.
e
Referenced sync.
f
Output format.
g
Output frame rate.
h
Input format.
i
GENLOCK status.
