1161 Ringwood Ct, #110, San Jose, CA 95131, U. S. A. Tel.: (408) 748-9100, Fax: (408) 770-9187 www.analogtechnologies.com
Copyrights 2000-2021, Analog Technologies, Inc. All Rights Reserved. Updated on 3/11/2021
Email: [email protected]/[email protected] 10
Analog Technologies
ALDD28V15A401
Digital High Voltage Constant Current 15A Laser Driver
3. When using a bench top power supply, set the current
limit to >1.5 times higher than the maximum current the
controller requires.
Warning:
Both the surface mount and the through
hole types of packages can only be soldered manually on
the board by a solder iron of < 310
°
C (590
°
F), do not use
a reflow oven to solder this laser driver.
ORDERING INFORMATION
Table 5. Part Number
Part Number
Description
ALDD28V15A401D
15A constant current driver
Table 6. Unit Price
Quantity (pcs)
1
−
4
5
−
24
25
−
99
≥
100
Unit Price
$560 $540 $520 $499
NOTICE
1.
ATI warrants performance of its products for one year to the specifications applicable at the time of sale, except for those
damaged by excessive abuse. Products found not meeting the specifications within one year from the date of sale can be
exchanged free of charge.
2.
ATI reserves the right to make changes to its products or to discontinue any product or service without notice, and advise
customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on
is current and complete.
3.
All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgment, including those
pertaining to warranty, patent infringement, and limitation of liability. Testing and other quality control techniques are utilized
to the extent ATI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily
performed, except those mandated by government requirements.
4.
Customers are responsible for their applications using ATI components. In order to minimize risks associated with the
customers’ applications, adequate design and operating safeguards must be provided by the customers to minimize inherent
or procedural hazards. ATI assumes no liability for applications assistance or customer product design.
5.
ATI does not warrant or represent that any license, either expressed or implied, is granted under any patent right, copyright,
mask work right, or other intellectual property right of ATI covering or relating to any combination, machine, or process in
which such products or services might be or are used. ATI’s publication of information regarding any third party’s products
or services does not constitute ATI’s approval, warranty or endorsement thereof.
6.
IP (Intellectual Property) Ownership: ATI retains the ownership of full rights for special technologies and/or techniques
embedded in its products, the designs for mechanics, optics, plus all modifications, improvements, and inventions made by
ATI for its products and/or projects.
