[EL34 SE V Amplifier Full Kit]
Analog Metric
www.analogmetric.com
4
Overview
EL34 SE V amplifier uses common pentode EL34 vacuum tubes for the class
A amplification with 6SN7 / 6SL7 as the input stage. The 6SN7 tubes are configured as
two cascading stages, the common-cathode and cathode follower, respectively. The
output power can reach 10W for each channel.
Specification
Tubes: two EL34 and two 6SN7 / 6SL7
Voltage gain: 22dB
Operating frequency: 20-20KHz
Input impedance: 250K Ohms
Output impedance: 4, 8, 16 Ohms
Output Power: 10W
Input sensitivity: 1.2V RMS
S/N Ratio: >90dB
Stereo single-end input and output
Power requirements: one or two 280V DC (total 250mA) and two 6.3V DC/AC (1.5A)
PCB dimension: 130mm (W) x 165mm (L) for EL34 SE PCB
PCB thickness: 2.4mm, double layer, 2oz copper.
