UG-2033
Evaluating the ADPD6000 Multimodal Sensor Front End
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Rev. 0 | 1 of 20
FEATURES
►
►
4 separately driven LEDs included: 1 green LED at the center, 1
red LED, and 2 infrared LEDs
►
Four channels of PD input: two channels with single PD, and two
channels with double PD
►
Works with the VSM Client evaluation software allowing
►
Time domain graphing and logging
►
Selection of supported functions, including PPG, BIA, and
ECG
►
Real-time data display with the various combinations of the
functions
EVALUATION KIT CONTENTS
►
EVAL-ADPD6000Z evaluation board
►
ADDITIONAL EQUIPMENT NEEDED
►
USB to Type-C cable
►
3.7 V battery
►
Electrode board
►
Soft cable to connect EVAL-ADPD6000Z and EVAL-VSMUCZ
►
Wrist strap
ONLINE RESOURCES
►
ADPD6000 data sheet
►
VSM Client software (available on EVAL-ADPD6000 product
page)
GENERAL DESCRIPTION
This user guide describes the operation of the EVAL-ADPD6000Z
demonstration kit, which is an evaluation module for the
ADPD6000.
The ADPD6000 is a fully integrated analog front end (AFE) for
wearable vital signal monitoring (VSM) devices. The key functions
of the ADPD6000 include photoplethysmography (PPG), electrocar-
diography (ECG), and body impedance analysis (BIA).
The demonstration kit includes both software and hardware. The
EVAL-ADPD6000Z can evaluate the AFE feature and verify the
system design based on the AFE. According to the requirements of
the application, the user can use a cable connection or Bluetooth
connection to establish communication between the PC and the
EVAL-ADPD6000Z.
This user guide also describes the example configuration of the
different functions of the ADPD6000.
For full details on the ADPD6000, see the ADPD6000 data sheet,
which must be consulted in conjunction with this user guide when
using the EVAL-ADPD6000Z.
EVALUATION BOARD PHOTOGRAPH
Figure 1. EVAL-ADPD6000Z
