UG-1635
One
Technology
Way
•
P.O.
Box
9106
•
Norwood,
MA
02062-9106,
U.S.A.
•
Tel:
781.329.4700
•
Fax:
781.461.3113
•
www.analog.com
Evaluating the
Robust, Industrial, Low Latency, and Low Power
10 Mbps, 100 Mbps, and 1 Gbps Ethernet PHY
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Rev. 0 | Page 1 of 30
FEATURES
FMC connector for MII interface, MDIO signals, and status
signals
Accessible, surface-mount configuration resistors and dial
switches
Operates from a single, external 5 V supply
EVALUATION KIT CONTENTS
EVAL-ADIN1300FMCZ evaluation board
MDIO interface dongle
EQUIPMENT NEEDED
Power supply (choose one of the following):
5 V power supply rail to connect to the EXT_5V connector
5 V barrel adaptor to connect to the P4 plug
Ethernet cable
USB cable
PC running Windows 7 and upward
SOFTWARE NEEDED
Ethernet PHY software and GUI (available to download on
product page)
DOCUMENTS NEEDED
data sheet
GENERAL DESCRIPTION
The EVAL-ADIN1300FMCZ allows simplified evaluation of the
key features of the
robust, industrial, low latency
gigabit, 10 Mbps, 100 Mbps, and 1 Gbps, Ethernet physical layer
(PHY). The EVAL-ADIN1300FMCZ is powered by a single,
external, 5 V supply rail that can be supplied either via the
EXT_5V connector or via the P4 plug.
All chip supplies are regulated from the 5 V rail providing
supply rails required for AVDD3P3, VDD0P, and VDDIO.
The P3 field programmable gate array (FPGA) mezzanine
connector (FMC) connector is provided for connection to a
master FPGA system for the media access control (MAC)
interface and management data input/output (MDIO) control.
The P5 connector provides an alternative means for MDIO
control. The EVAL-ADIN1300FMCZ is fitted with a 25 MHz
crystal (Y1).
For complete specifications for the
device, see the
data sheet, which must be consulted in conjunction
with this user guide when using the EVAL-ADIN1300FMCZ.
