UG-1060
EVAL-ADAQ7980SDZ User Guide
Rev. 0 | Page 4 of 30
GETTING STARTED
The following section contains the installation instructions for
the
ADAQ798x Evaluation Software
and the drivers for the SDP
hardware required for operation of the software. The evaluation
software provides a graphical user interface (GUI) for quick
evaluation of the
ADAQ7980
.
SOFTWARE INSTALLATION PROCEDURES
Download the evaluation board software from the
ADAQ7980
product page on the Analog Devices website.
There are two steps to the installation:
•
The
ADAQ798x Evaluation Software
installation
•
The
EVAL-SDP-CB1Z
SDP board drivers installation
Warning
Install the evaluation board software and drivers before connecting
the
EVAL-ADAQ7980SDZ
evaluation board and
EVAL-SDP-
CB1Z
board to the USB port of the PC to ensure the evaluation
system is correctly recognized when it connects to the PC.
Installing the
ADAQ7980
Evaluation Board Software
To install the
ADAQ798x Evaluation Software
,
1.
Start the Windows operating system and download the
software from the
EVAL-ADAQ7980SDZ
product page on
the Analog Devices website.
2.
Unzip the downloaded file.
3.
Double-click the
setup.exe
file to begin the evaluation
board software installation (see Figure 2).
Figure 2.
ADAQ7980
Evaluation Board Software Installation—Installation
Begins
4.
Select a location to install the software and click
Next
. The
default location is
C:\Program Files (x86)\Analog Devices\
ADAQ798x
. This location also contains the executable
software and example files.
Figure 3.
ADAQ7980
Evaluation Board Software Installation—Selecting the
Location for Software Installation (the Default Location Is Shown)
5.
A license agreement appears. Read the agreement, and then
select
I accept the License Agreement
and click
Next
.
Figure 4.
ADAQ7980
Evaluation Board Software Installation—Accepting the
License Agreement
15065-
002
15065-
003
15065-
004
