UG-1060
EVAL-ADAQ7980SDZ User Guide
Rev. 0 | Page 12 of 30
MODES OF OPERATION
SDP CONTROLLED MODE
The
ADAQ7980
uses a high speed serial interface that allows
sampling rates of up to 1 MSPS. For more information about the
operation of the serial interface, refer to the
ADAQ7980
/
ADAQ7988
data sheet.
The
ADAQ7980
uses the serial interface to transfer data to the
EVAL-SDP-CB1Z
.
The
EVAL-ADAQ7980SDZ
communicates with the
EVAL-SDP-
CB1Z
board using a 3.3 V logic level. Logic voltages that exceed
3.3 V can damage the SDP interface.
USER DEFINED CONTROL MODE
The
EVAL-ADAQ7980SDZ
can also be used without the
EVAL-SDP-CB1Z
controller board. In this case, the
EVAL-
ADAQ7980SDZ
connects to the serial interface using the P8
connector or the test points. For more information about the
operation of the serial interface, refer to the
ADAQ7980
/
ADAQ7988
data sheet.