UG-1268
One
Technology
Way
•
P.O.
Box
9106
•
Norwood,
MA
02062-9106,
U.S.A.
•
Tel:
781.329.4700
•
Fax:
781.461.3113
•
www.analog.com
Evaluating the
Single-Channel, 16-Bit Current and Voltage Output DAC with
Dynamic Power Control and HART Connectivity
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Rev. A | Page 1 of 22
FEATURES
Full featured evaluation board for the
On-board 2.5 V
reference
On-board
isolated PMU with integrated
SPI signal isolation channels
software for control
EVALUATION KIT CONTENTS
EVAL-AD5758SDZ evaluation board
EQUIPMENT NEEDED
board
Bench top power supply and connector cables
ADDITIONAL DOCUMENTS REQUIRED
data sheet
SOFTWARE REQUIRED
software for control
GENERAL DESCRIPTION
This user guide describes the evaluation board for the
a single-channel, voltage and current output, digital-to-analog
converter (DAC) with on-chip dynamic power control (DPC) to
minimize package power dissipation.
For full details, refer to the
data sheet. Consult the data
sheet when using the EVAL-AD5758SDZ. The configuration of
the various link options is explained in the Evaluation Board
Hardware section. The installation of the companion software is
discussed in the Evaluation Software Quick Start Procedures
section.
The EVAL-AD5758SDZ, as shown in Figure 1, requires the
board. The EVAL-AD5758SDZ interfaces to
the USB port of the PC via the
board. The
Analysis|Control|Evaluation (ACE)
software allows simplified
programming of the
, and is available with the EVAL-
AD5758SDZ evaluation board.
EVALUATION BOARD PHOTOGRAPH
16
71
0
-00
1
Figure 1. EVAL-AD5758SDZ Evaluation Board
