UG-867
EVAL-AD5629RSDZ/EVAL-AD5669RSDZ User Guide
Rev. 0 | Page 4 of 14
GETTING STARTED
INSTALLING THE SOFTWARE
The evaluation kit for the
AD5629R
/
AD5669R
includes self
installing software on the CD provided. The software is compatible
with Windows® Vista™ (32-bit), Windows 7 (32-bit and 64-bit),
and Windows 8.
Install the software before connecting the
SDP-B
board to the USB
port of the PC to ensure the
SDP-B
board is recognized when
connecting to the PC.
To install the software, complete the following steps:
1.
Start the Windows operating system and insert the CD.
2.
The installation software opens automatically. If it does not
open automatically, run the setup.exe file from the CD.
3.
After installation is complete, power up the evaluation
board as described in the Power Supplies section.
4.
Connect the evaluation board to the
SDP-B
board and
connect the
SDP-B
board to the PC using the USB cable
included in the kit.
5.
When the software detects the evaluation board, proceed
through any dialog boxes that appear to finalize the
installation.
EVALUATION BOARD SETUP PROCEDURES
To set up the evaluation board, complete the following steps:
1.
Connect the evaluation board to the
SDP-B
board and
connect the USB cable from the
SDP-B
board to the PC.
2.
Power the
SDP-B
and evaluation board by connecting
5 V dc to the J2 connector (AVDD and AGND).
