UG-1787
EV1HMC8362LP6G
/
EV1HMC8364LP6G
User Guide
Rev. 0 | Page 6 of 11
EVALUATION BOARD SOFTWARE
SOFTWARE
Currently, there is no software available for the
EV1HMC8362LP6G and EV1HMC8364LP6G because they can
be evaluated without the use of software. However, the
EV1HMC8362LP6G and EV1HMC8364LP6G are configured in
a manner that allows use of a Linduino, Arduino Uno,
SDP-K1
,
or similar microcontroller board, which may be beneficial for
users needing to develop and test switching algorithms for their
application.
To connect the
SDP-K1
interface board to the
EV1HMC8362LP6G or EV1HMC8364LP6G, flip the
SDP-K1
board over so that the digital input/output pins (Pin 8 through
Pin 14) of the
SDP-K1
line up with the odd numbered pins of
Connector P3 (Pin 3 to Pin 15), respectively, as shown in
Figure 3.
23626-
003
Figure 3. SDP-K1 Board Mounted to the EV1HMC8362LP6G
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
