Analog Devices EV-SC598-SOM, Manual

Page: 5 / 33

1 Preface
Thank you for purchasing the Analog Devices, Inc. System-on-Module (SoM) EV-SC598-SOM evaluation board.
The EV-SC598-SOM primarily hosts the ADSP-SC598 audio processor, 8 Gbit of ISSI DDR3 memory, a 512 Mbit
Quad SPI FLASH, voltage regulation, a FTDI UART to USB interface, and a high speed external connector array
that contains all of the peripheral I/O signals. Through the high speed external connector array, the
EV-SC598-SOM
is intended for use with a growing family of SoM carrier products that contain a variety of peripherals to support
different applications. The SoM carrier base products that exist today are the
EV-SOMCRR-EZKIT and EV-
SOMCRR-AUTO .
The CrossCore Embedded Studio
®
(CCES) software development tool chain is required for a full evaluation of this
hardware platform. The EV-SC598-SOM can also be used in a limited standalone mode while not plugged into a
SoM Carrier such as the EV-SOMCRR-EZKIT or EV-SOMCRR-AUTO . The standalone mode is useful for evaluat-
ing the CCES Software Development Tools and benchmarking software algorithms that do not require peripheral
I/O.
The evaluation board is designed to be used in conjunction with the CrossCore Embedded Studio
®
2.11.0+ devel-
opment environment for advanced application code development and debug, with features that enable the ability to:
•
Create, compile, assemble, and link application programs written in C++, C, and assembly
•
Load, run, step, halt, and set breakpoints in application programs
•
Read and write data and program memory
•
Read and write core and peripheral registers
Purpose of This Manual
This manual provides instructions for installing the product hardware (board). This manual describes operation and
configuration of the board components and provides guidelines for running code on the board.
Manual Contents
The manual consists of:
•
Using the board
Preface
EV-SC598-SOM
®
Manual
1–1