Copyright Information
© 2020 Analog Devices, Inc., ALL RIGHTS RESERVED. This document may not be reproduced in any form
without prior, express written consent from Analog Devices, Inc.
Disclaimer
Analog Devices, Inc. reserves the right to change this product without prior notice. Information furnished by Ana-
log Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its
use; nor for any infringement of patents or other rights of third parties which may result from its use. No license is
granted by implication or otherwise under the patent rights of Analog Devices, Inc.
Trademark and Service Mark Notice
The Analog Devices logo, Blackfin, B, SHARC, SHARC+, CrossCore, Vi+, EZ-KIT, EZ-Extend-
er, and EngineerZone are registered trademarks of Analog Devices, Inc.
All other brand and product names are trademarks or service marks of their respective owners.
Regulatory Compliance
The
EV-SC598-SOM
evaluation board is designed to be used solely in a laboratory environment. The board is not
intended for use as a consumer-end product or as a portion of a consumer-end product. The board is an open sys-
tem design, which does not include a shielded enclosure and, therefore, may cause interference to other electrical
devices in close proximity. This board should not be used in or near any medical equipment or RF devices.
The
EV-SC598-SOM
evaluation board contains ESD (electrostatic discharge) sensitive devices. Electrostatic charges
readily accumulate on the human body and equipment and can discharge without detection. Permanent damage may
occur on devices subjected to high-energy discharges. Proper ESD precautions are recommended to avoid perform-
ance degradation or loss of functionality. Store unused boards in the protective shipping package.
EV-SC598-SOM
®
Manual
ii
Summary of Contents for EV-SC598-SOM
Page 33: ...EV SC598 SOM Manual 17...
