8
UG-1339 Rev 0
DEMO MANUAL DC2685A
Table 5. DC590 Jumper Selection. Refer to the DC590 Demo Manual for Further Details.
JUMPER
SETTING
OPERATION
JP1
PROG
Microcontroller in-circuit programming header. Do NOT install jumper; make no
connections.
JP2
MODE
Do NOT install jumper; make no connections.
JP3
Watchdog Enables
Do NOT install jumper; make no connections.
JP4
EE
Jumper MUST be in the EN position.
JP5
SW
(Right Hand Side)
MUST be in the ON position.
See Connections section.
ISO
(Left Hand Side)
Controls the isolated supply.
See Connections section.
JP6
VCCA Control
See Connections section.
SUPPLEMENTARY
