ADZS-U4050LF-EZKIT
User Guide
UG-1163
Rev. 0 | Page 3 of 31
OVERVIEW
The ADZS-U4050LF-EZKIT allows the user to program, debug,
and evaluate the performance of the
ADuCM4050
microcontroller.
CONTENTS
The ADZS-U4050LF-EZKIT package contains the following
items (see Figure 2):
ADZS-U4050LF-EZKIT board
USB 2.0 cable
J-Link LITE emulator
J-Link LITE Emulator
The J-Link LITE emulator board provides a debug path interface
via serial wire, power supply, and UART communication with
the ADZS-U4050LF-EZKIT board. Figure 3 shows a top view of
the emulator board.
The serial wire debug connector is a 20-pin device, but only
three connections are made: SWDIO and SWCLK are used for
debug purposes and the RESET connection is used to provide a
reset from the PC if required. Table 1 shows the JTAG connector
pin configuration.
Table 1. JTAG Connector Pinouts
Pin Number
Signal
1 VDD
4, 6, 8, 10, 12, 14, 16, 18, 20
GND
7 SWDIO
9 SWCLK
15 RESET
When measuring current consumption using an external supply
on the ADZS-U4050LF-EZKIT board IOVDD pins, it is recomm-
ended that the emulator be disconnected.
The connection on the board is used in P4 a debug port.
1
607
6-
0
02
Figure 2. ADZS-U4050LF-EZKIT Package Contents
