ADZS-U4050LF-EZKIT
User Guide
UG-1163
Rev. 0 | Page 11 of 31
ADZS-U4050LF-EZKIT BOARD CONNECTORS
The ADZS-U4050LF-EZKIT board has a number of connectors
used to connect different boards and kits for evaluation. The
locations of these connectors are shown in Figure 10.
ARDUINO UNO CONNECTORS (J4, J5, J6, AND J7)
The ADZS-U4050LF-EZKIT board has an Arduino Uno
compatible form factor interface that can accept Arduino
shields and daughter boards. The pinout of the Arduino
interface is described in Table 5 through Table 8.
Table 5. Arduino Interface J4 Connector Pinout
J4 Pin No.
Arduino Pin Name
ADuCM4050
Pin Name
1
No connect
Not applicable
2 3V
Not
applicable
3 RST
SYS_HWRST
4 3V
Not
applicable
5 5V
Not
applicable
6 GND
Not
applicable
7 GND
Not
applicable
8 VIN
Not
applicable
Table 6. Arduino Interface J5 Connector Pinout
J5 Pin No.
Arduino Pin Name
ADuCM4050
Pin Name
1 A0
ADC0_VIN0
(P2_03)
2 A1
ADC0_VIN1
(P2_04)
3 A2
ADC0_VIN2
(P2_05)
4 A3
ADC0_VIN3
(P2_06)
5 A4
ADC0_VIN4
(P2_07)
6 A5
ADC0_VIN5
(P2_08)
7 Not
applicable
P1_03/GPIO19/SPI2_MOSI
8 Not
applicable
P1_04/GPIO20/SPI2_MISO
160
76-
010
Figure 10. Connector Locations
