Analog Devices ADZS-AD2428MINI, Manual

Page: 12 / 19

Figure 3-2: Connector Locations
A
2
B (
P10
and
P9
)
P10 is used to connect towards the slave board and P9 is used to connect towards the master board. These connec-
tors allow the AD2428 on the eval board to talk to other A
2
B devices on the bus.
Part Description Manufacturer Part Number
2-pin DuraClik Molex 5023520200
Mating Cable
DuraClik cable assembly
A2B Interface(
P1
)
The A
2
B Interface is a high speed connection that allows connecting the ADZS-AD2428MINI to other boards,
such as the ADZS-EZKIT-SOM. This connector brings out the signals for I2S, TWI, SPI, GPIO, 1.8v power, 3.3v
power, VBUS and also is +12v input for the ADZS-AD2428MINI.
The following table contains the pinout for the A2B Interface high speed connector:
Signal Pin Pin Signal
GND 1 2 GND
Connectors
ADZS-AD2428MINI Manual 3–3