Analog Devices ADV7604, User Manual

Page: 8 / 27

© 2010 Analog Devices, Inc. All rights reserved.
Pr. A June 2010
Analog Devices B.V. 8 of 27 - 8 -
Figure 5 – ADV7604 Evaluation Board
4.1.1 Connecting Input Video
To connect an input video source to the evaluation board, use a suitable cable and one of
the input video connectors outlined above. Do not use excessive force when connecting
or disconnecting the cables as this may result in damage to the evaluation board.
4.1.2 EDID Configuration
There are two EDID options available to user on the ADV7604 board an external
PROM on port D to which an EDID can be programmed or an internal EDID PROM
within the ADV7604.
4.1.2.1 Configuring the External EDID
To program the external PROM (U10) for port D, complete the following procedure:

Connect the PROM to the I2C bus by putting jumpers K7 and K8 into position B

Connect the evaluation platform to the as outlined in Section 3
D-terminal in
D-terminal in
Graphics in
Component in
Motherboard
Connector
HDMI in HDMI in HDMI in HDMI in