© 2010 Analog Devices, Inc. All rights reserved.
Pr. A June 2010
Analog Devices B.V.
4 of 27
- 4 -
3.
Initial Configuration
3.1
Hardware
The ATV evaluation platform is comprised of three modules the ADV7604 evaluation
board, the ATV motherboard and the video output module. To assemble the evaluation
platform, plug the ADV7604 evaluation board into the Female AV Input connector of the
motherboard and plug the video output module into the Male AV Output connector of
the motherboard.
Connect the female connector of the 7.5V DC power supply module supplied with the
evaluation kit to the motherboard power connector, J18. Connect the USB cable supplied
with the evaluation kit to the motherboard USB connector, J12.
The evaluation platform should now resemble Figure 1.
To turn the evaluation platform on, flick motherboard power switch (S10) to position
light 2 3 seconds later. This indicates the eval platform is now ready to use.
Figure 1 – ATV Evaluation Platform
Summary of Contents for ADV7604
