Analog Devices ADSP2192-12 EZ-KIT LITE, Manual

Page: 12 / 50

ADSP2192-12 EZ-KIT Lite Evaluation System Manual
2-1
2 GETTING STARTED
2.1 Overview
This chapter provides information you need to install your software and the ADSP2192-12 EZ-KIT
Lite evaluation board. It is important that you install your software and hardware in the order
presented for correct operation.
2.2 Contents of Your EZ-KIT Lite Package
The EZ-KIT Lite evaluation board contains ESD (electrostatic
discharge) sensitive devices. Electrostatic charges readily accumulate
on the human body and equipment and can discharge without
detection. Permanent damage may occur on devices subjected to high
energy discharges. Proper ESD precautions are recommended to avoid
performance degradation or loss of functionality. Unused EZ-KIT
Lites should be stored in the protective shipping package.
Your ADSP2192-12 EZ-KIT Lite evaluation board package should contain the following items. If
any item is missing, contact the vendor where you purchased your EZ-KIT Lite or Analog Devices.
•
ADSP2192-12 EZ-KIT Lite board
•
CD containing:
o
Vi+ for theADSP-21xx with demo license
o
2192-12 EZ-KIT Lite debug software (PCI monitor, source)
o
2192-12 EZ-KIT Lite example programs
o
ADSP2192-12 EZ-KIT Lite manual (this document)
• ADSP2192-12 Anomaly Sheet
•
Registration card - please fill out and return
2.3 PC Configuration
For correct operation of the Vi+ software and the EZ-KIT Lite, your computer must have
the minimum configuration shown below.
Windows 98,Windows 2000, or
Windows NT (release 4.0, Service Pack 3 or later)
One available PCI slot
Pentium processor 166 MHz or faster
VGA Monitor and color video card
2-button mouse
100 MB available space
32 MB RAM
CD-ROM
Table 2-1: Minimum PC Configuration
www.BDTIC.com/ADI