CCES Install and Session Startup
1-4
ADSP-BF592 EZ-KIT Lite Evaluation System Manual
CCES Install and Session Startup
For information about CCES and to download the software, go to
www.analog.com/CCES
. A link for the ADSP-BF592 EZ-KIT Lite Board
Support Package (BSP) for CCES can be found at
http://www.analog.com/Blackfin/EZKits
.
Follow these instructions to ensure correct operation of the product soft-
ware and hardware.
Step 1:
Connect the EZ-KIT Lite board to a personal computer (PC) run-
ning CCES using one of two options: an Analog Devices emulator or via
the debug agent.
Using an Emulator:
1. Plug one side of the USB cable into the USB connector of the emu-
lator. Plug the other side into a USB port of the PC running
CCES.
2. Attach the emulator to the header connector
P2
(labeled
JTAG
) on
the EZ-KIT Lite board.
Using the on-board Debug Agent:
1. Plug one side of the provided USB cable into the USB connector of
the debug agent
ZP1
(labeled
USB
).
2. Plug the other side of the cable into a USB port of the PC running
CCES.
Summary of Contents for ADSP-BF592 EZ-KIT Lite
Page 4: ......
Page 67: ...A B 4 3 2 ADSP B S...
Page 77: ...Index I 4 ADSP BF592 EZ KIT Lite Evaluation System Manual...
