Analog Devices ADSP-21992 EZ-KIT LITE, System Manual

Page: 33 / 87

ADSP-21992 EZ-KIT Lite Evaluation System Manual 1-13
Getting Started
To install the USB driver:
1. If Vi+ 3.5 is already installed on your system, go to
step 2.
Otherwise, run Vi+ 3.5 installation. Refer to the Installa-
tion Quick Reference Card for Vi+ for a detailed
installation description.
When installing Vi+ 3.5 on Windows 2000, make sure
the appropriate EZ-KIT Lite component is selected for the
installation.
2. Connect the EZ-KIT Lite device to your PC’s USB port.
Windows 2000 automatically detects an EZ-KIT device and auto-
matically installs the appropriate driver for the selected device (see
step 1).
3. Verify the installation by following the instructions in “Verifying
Driver Installation” on page 1-15 .
Windows XP USB Driver
Vi+ 3.5 installation software pre-installs the necessary drivers for
the selected EZ-KIT Lite. The install also upgrades an older driver if an
older driver be detected in the system.
$
Prior to running the Vi+ 3.5 installer, ensure that no
other Hardware Wizard windows are running in the background.
If a wizard window is running, close it before starting the installer.
To install the USB driver:
1. If Vi+ 3.5 is already installed on your system, go to
Step 2.
Otherwise, run Vi+ 3.5 installation. Refer to the Installa
tion Quick Reference Card for Vi+ for a detailed installa-