Analog Devices ADSP-21479 EZ-Board Manual Download Page 17

Page: 17 / 113

ADSP-21479 EZ-Board Evaluation System Manual

xvii

Preface

• E-mail your questions about processors, DSPs, and tools develop-

ment software from

CrossCore Embedded Studio

Vi+

Choose

Help > Email Support

. This creates an e-mail to

[email protected]

and automatically attaches

your

CrossCore Embedded Studio

Vi+

version infor-

mation and

license.dat

file.

• E-mail your questions about processors and processor applications

to:

[email protected]

(Greater China support)

• In the

USA only

, call

1-800-ANALOGD

(1-800-262-5643)

• Contact your Analog Devices sales office or authorized distributor.

Locate one at:

www.analog.com/adi-sales

• Send questions by mail to:

Processors and DSP Technical Support
Analog Devices, Inc.
Three Technology Way
P.O. Box 9106
Norwood, MA 02062-9106
USA

Supported Processors

This evaluation system supports Analog Devices ADSP-21479 SHARC
processors. Functionality of the ADSP-21478 processors can be evaluated
using the same product because the processors have many similarities.

Summary of Contents for ADSP-21479 EZ-Board


















































































































Search results

Summary of Contents for ADSP-21479 EZ-Board

Reviews:

Related manuals for ADSP-21479 EZ-Board

Brands by name

Popular brands

Analog Devices ADSP-21479 EZ-Board, Manual

Search results

Summary of Contents for ADSP-21479 EZ-Board

Reviews:

Related manuals for ADSP-21479 EZ-Board

Brands by name

Popular brands