EVAL-ADP5520
Rev. 0 | Page 16 of 24
COMMAND SAVE/LOAD TAB
The
Command Save/Load
tab can be used to record data that
you write to or read from the ADP5520. By default, this feature
is disabled. To enable it, click the red
Disabled
button (it
changes to a green
Enabled
button). As you write data to and
read data from the ADP5520, each event is displayed in the
Command History
box. You can save the command history list
to a file by clicking the
Save Command History to File
button.
You can then recall and rerun the saved commands by clicking
the
Load and Run Commands from File
button.
0
76
51
-00
8
Figure 8. Command Save/Load Tab
