Analog Devices ADM1060, Manual

Page: 39 / 52

ADM1060
Rev. B | Page 39 of 52
MASK REGISTERS
Table 52. List of Mask Registers
Hex Addr. Table Name Default Power On Value Description
9D Table 53 ERRMASK1 0x00 Error Mask Register for the seven SFDs
9E Table 54 ERRMASK2 0x00 Error Mask Register for the four GPIs and the Watchdog Detector
Table 53. Bit Map for ERRMASK1 Register 0x9D (Power-On Default 0x00)
Bit Name R/W Description
7 Reserved X Unused
6 VP4MASK R/W If high, a fault occurring on the supply at input VP4 is ignored and not logged in LATF1.
5 VP3MASK R/W If high, a fault occurring on the supply at input VP3 is ignored and not logged in LATF1.
4 VP2MASK R/W If high, a fault occurring on the supply at input VP2 is ignored and not logged in LATF1.
3 VP1MASK R/W If high, a fault occurring on the supply at input VP1 is ignored and not logged in LATF1.
2 VHMASK R/W If high, a fault occurring on the supply at input VH is ignored and not logged in LATF1.
1 VB2MASK R/W If high, a fault occurring on the supply at input VB2 is ignored and not logged in LATF1.
0 VB1MASK R/W If high, a fault occurring on the supply at input VB1 is ignored and not logged in LATF1.
Table 54. Bit Map for ERRMASK2 Register 0x9E (Power-On Default 0x00)
Bit Name R/W Description
7–5 Reserved X Unused
4 WDIMASK R/W If high, a change in the logic level on the WDI output is ignored and not logged in LATF2.
3 GPI4MASK R/W If high, a change in the logic level on the GPI4 input is ignored and not logged in LATF2.
2 GPI3MASK R/W If high, a change in the logic level on the GPI3 input is ignored and not logged in LATF2.
1 GPI2MASK R/W If high, a change in the logic level on the GPI2 input is ignored and not logged in LATF2.
0 GPI1MASK R/W If high, a change in the logic level on the GPI1 input is ignored and not logged in LATF2.