Quick Start Guide
AD9125-EBZ
©2010 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D00000-0-1/07(A)
Figure 6
Double click on the dark blue AD9125 on the board diagram. Ensure that the settings of the AD9125 match with Figure 7 and click “Apply
Changes.”
Figure 7
Open the DPG Downloader software. The ‘DCO frequency’ shown should be 250MHz. (Due to the resolution of the DPG frequency
counter, the measured frequency could be a little off). In the ‘evaluation board’ drop down menu, the selection should be shown as ‘AD9125’.
This selection is automatically done when you plug the USB cable into the evaluation board.
