Quick Start Guide
AD9125-EBZ
©2010 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D00000-0-1/07(A)
ACE Evaluation Software
Open ACE from the start window. It can be found by following the file path to the program or by searching in the windows search bar for
“ACE.” The icon indicates the ACE software.
If the board is connected properly, ACE will detect it and display it on the Start page under “Attached Hardware.” Double click this board.
Ensure that the
button is green in the subsystem image under the “System” tab. If not, click it, select the AD9125, and click “Acquire.”
Double click on the subsystem image.
Figure 2: Detected AD9125 in ACE
Figure 4: AD9125 Subsystem
To the left of the board diagram, click “Modify” under “Initial Configuration Summary” to edit the DAC and PLL setup of the board. In
some cases, the “Initial Configuration” page will already be shown.
Figure 5
Alter the inputs to match Figure 6. Click “Apply.”
