AD9642/AD9634/AD6672 User Guide
UG-386
One
Technology
Way
•
P.O.
Box
9106
•
Norwood,
MA
02062-9106,
U.S.A.
•
Tel:
781.329.4700
•
Fax:
781.461.3113
•
www.analog.com
Evaluating the
Analog-to-Digital Converters
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Rev. A | Page 1 of 26
FEATURES
Full featured evaluation board for the
SPI interface for setup and control
External or
clocking option
Balun/transformer or amplifier input drive option
LDO regulator power supply
VisualAnalog and SPI controller software interfaces
EQUIPMENT NEEDED
Analog signal source and antialiasing filter
Sample clock source (if not using the on-board oscillator)
2 switching power supplies (6.0 V, 2.5 A), CUI
EPS060250UH-PHP-SZ, provided
PC running Windows® 98 (2nd ed.), Windows 2000,
Windows ME, or Windows XP
USB 2.0 port recommended (USB 1.1 compatible)
evaluation board
FPGA-based data capture kit
SOFTWARE NEEDED
VisualAnalog
SPI controller
DOCUMENTS NEEDED
data sheet
data sheet
VisualAnalog Converter Evaluation
Tool Version 1.0 User Manual
High Speed ADC SPI Control Software
Interfacing to High Speed ADCs via SPI
Understanding ADC Testing and
Evaluation
GENERAL DESCRIPTION
This user guide describes the
evaluation board, which provides all of the support circuitry
required to operate the
in their
various modes and configurations. The application software
used to interface with the devices is also described.
The
data sheets provide
additional information and should be consulted when using the
evaluation board. All documents and software tools are available at
. For additional information or
questions, send an email to
TYPICAL MEASUREMENT SETUP
10
593
-00
1
Evaluation Board (on Left) and
Data Capture Board (on Right)
