Anaheim Automation BSCKB1-120081 User Manual Download Page 8

August 2013

L011088

8

Dimensions

COPYRIGHT

 

Copyright 2013 by Anaheim Automation. All rights reserved. No part of this publication may be reproduced, transmitted, 

transcribed, stored in a retrieval system, or translated into any language, in any form or by any means, electronic, 

mechanical, magnetic, optical, chemical, manual, or otherwise, without the prior written permission of Anaheim 

Automation, 910 E. Orangefair Lane, Anaheim, CA 92801. 

DISCLAIMER

Though every effort has been made to supply complete and accurate information in this manual, the contents are 

subject to change without notice or obligation to inform the buyer. 

In no event will Anaheim Automation be liable 

for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use 

the product or documentation.

  

Anaheim Automation’s general policy does not recommend the use of its’ products in life support applications wherein 

a failure or malfunction of the product may directly threaten life or injury.  Per Anaheim Automation’s Terms and 

Conditions, the user of Anaheim Automation products in life support applications assumes all risks of such use and 

indemnifies Anaheim Automation against all damages.

LIMITED WARRANTY

All Anaheim Automation products are warranted against defects in workmanship, materials and construction, when 

used under Normal Operating Conditions and when used in accordance with specifications. This warranty shall be 

in effect for a period of twelve months from the date of purchase or eighteen months from the date of manufacture, 

whichever comes first. 

Warranty provisions may be voided if products are subjected to physical modifications, 

damage, abuse, or misuse.

Anaheim Automation will repair or replace at its’ option, any product which has been found to be defective and is 

within the warranty period, provided that the item is shipped freight prepaid, with previous authorization (RMA#) to 

Anaheim Automation’s plant in Anaheim, California. 

TECHNICAL SUPPORT

If you should require technical support or if you have problems using any of the equipment covered by this manual, 

please read the manual completely to see if it will answer the questions you have. If you need assistance beyond what 

this manual can provide, contact your Local Distributor where you purchased the unit, or contact the factory direct.

Summary of Contents for BSCKB1-120081









Reviews: