14
Using your Induction Hob
To start cooking
1. Touch the ON/OFF control.
After power on, the buzzer beeps once, all displays show “ – “ or “ – – “,
indicating that the induction hob has entered the state of standby mode.
2. Place a suitable pan on the cooking zone that you wish to use.
• Make sure the bottom of the pan and the surface of the cooking zone
are clean and dry.
3. Select one heating zone by touching the
slider,and a indicator next to the key will flash.
4. Select a heat setting by touching the “-” “+” control or slider along the
power level control.
a. If you don’t select a heat zone within 1 minute, the ceramic hob will automatically
switch off. You will need to start again at step 1.
b. You can modify the heat setting at any time during cooking.
If the display flashes
alternately with the heat setting
This means that:
• you have not placed a pan on the correct cooking zone or,
• the pan you’re using is not suitable for induction cooking or,
• the pan is too small or not properly centred on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The display will automatically turn off after 1 minutes if no suitable pan is placed on it.
When you have finished cooking
1. Touching the heating zone selection control that you wish to switch off.
