AMYPOWER ALLTRACK R3 & R SERIES - Owner’s Manual (Rev. A)
28
PROHIBITED!
4. Place the battery compartment lid on power base.
Never make direct contact across both battery terminals, as
an explosion may occur. A spark may result in an explosion
and/or fire resulting in severe injury or death.
WARNING
E. CHARGING BATTERIES
To avoid the risk of severe injury or death from electrical
shock, fire or explosion while charging:
PROHIBITED!
Never connect charger to a 240 volt source. The main
input voltage is 110 volts.
WARNING
Never touch the charger after it is connected to an
electrical outlet. This may cause electrical shock.
Never connect or disconnect charger from battery
while there is power to the charger.
WARNING
1.
Never use an extension cord. Use of an improper cord
could damage the charger or cause a fire or electrical
shock.
2.
A battery emits explosive hydrogen gas during charging.
To reduce the risk of fire or explosion:
Make sure area is well vented. Never charge battery in a
closed-in area.
Never smoke or allow a spark, flame or high heat near
battery during charging.
Never allow metal tools or chair parts to make direct
contact across both battery terminals.
3. Never look directly into cells when charging battery (wet
cell batteries).
ALWAYS:
1.
Use the charger that comes with your wheelchair.
Read and follow all instructions and warnings.
2.
Make sure room is well ventilated.
3.
Turn off all power to your chair.
4.
Connect and disconnect battery cables with caution. Q-
NOTE- Always remove and reattach the negative cable (black
cable) first.
5.
Make sure to allow enough time to fully charge
batteries.
NOTE- Batteries should never be left for long period in the
discharged state. Unused or stored batteries should be given
a charge once per month.
6.
To charge batteries, use the off-board charger by
plugging off-board charger plug into the off-board
charger socket.
WARNING
F. DISPOSING OF BATTERIES
1.
All batteries once they have reached the end of their useful
life are deemed to be hazardous waste.
2.
For further information on handling and recycling contact
your local recycling authority.
3.
Always dispose of product through a recognized agent.
XI. MAINTENANCE
A. NOTES
1.
Proper maintenance will improve performance and extend
the useful life of your chair.
2.
Clean your chair regularly. This will help you find loose or
worn parts and will make your chair easier to use.
3.
To protect your investment, have all major service and re-
pair work done by your supplier.
WARNING
1.
Your chair needs regular maintenance for peak perform-
ance and to avoid injury from chair failure, damage or
premature wear.
2.
Inspect and maintain this chair strictly per the
“Maintenance Chart”.
3.
If you detect a problem, make sure to service or repair
the chair before use.
4.
At least once a year, have a complete safety check and
service of your chair performed by a supplier.
B. CLEANING
1. Paint Finish:
Clean the paint finish with mild soapy water monthly.
Protect the paint with a coat of non-abrasive auto wax
every 6 months.
2. Motors:
Clean around motor area weekly with a slightly damp (not
wet) cloth.
Wipe off or blow away any fluff, dust, or dirt on or around
the motors.
NOTE- You do not need to grease or oil the chair.
3. Upholstery:
Hand-wash only as needed. Machine washing may
damage fabric. See label instructions for information.
Drip-dry only. Heat from a dryer may damage fabric.
NOTE- Washing the fabric may decrease fire retardant proper-
ties.
C. STORAGE TIPS
1.
Store your chair in a clean, dry area. If you fail to do so,
parts may rust or corrode.
2.
Before using your chair, make sure it is in proper
working order. Inspect and service all items on the
“Maintenance Chart”.
3.
If you store this chair for more than three months,
have it inspected by a supplier before use.
