4
WARNINGS: READ CAREFULLY BEFORE USING!
Before sitting on the rollator, make sure the Stella is fully opened and the seat is
completely down.
Before sitting on the rollator, make sure the lumbar support is well positioned
horizontally to prevent falling backwards. Verify that both knobs are fully tightened at
same height.
Before sitting on the rollator, make sure the wheel locks are engaged. In transport chair
mode, before the user transfers into or out of the chair, the attendant must apply both
rear wheel locks and make sure that the front casters are in the forward position. If the
wheels rotate while locked, please take the rollator back to the dealer for adjustment.
When the brakes/locks are released, the wheels should rotate freely.
Do not lean to one side, always keep your weight balanced on the rollator. Leaning
forward, while using the Stella as a transport chair without proper assistance, can cause
tipping.
In rollator mode, before sitting, put your hands on the hand grips and back-up until your
legs touch the seat. In transport chair mode, before sitting, back-up until your legs touch
the storage bag and use armrests to lower yourself down.
When getting up from the rollator in transport chair mode, assistance
is ALWAYS required.
a.
Attendant must apply wheel locks by pushing down on the brake handles.
b.
First, remove feet from footrests and place them firmly on the ground.
c.
Second, use armrests for support before attempting to stand up.
Do not hang bags or other items on hand grips – risk of tipping over!
Changing direction abruptly could make the rollator tip over.
