7
Not allowed to block the collision sensor in the bottom by using exotic objects which may
have interference to the collision sensor
Not allowed to crash, drop or vibrate the robot so that accidental injury can be avoided.
Not allowed to collide or beat the robot. Pushing the robot down or dropping it from a high
height is not allowed too.
Not allowed to use your hands or other objects to touch the gap among chassis, wheels,
head, and charging piles, etc.
Not allowed to connect the charging pile or accessory adapter to a non-standard power
socket. The normal standard of the power supply is 220V / 50Hz.
Not allowed to place the robot at open-side heights (including threshold, steps, stages,
tables and other place whose height is above 3cm), or slopes which is over 5 degrees.
Do not put the robot on a smooth surface, such as glass, to avoid unnecessary danger.
Do not twist the head and neck of the robot rudely.
Do Not
Do not place the robot under a strong magnetic environment.
Do not beat and scribe the outer body and touch screen of the robot by using external force.
Do not use sharp objects to scribe, probe, block ultrasonic sensors and infrared sensors
Do not place wet towels or clothing on the head of the robot which may cause malfunction
of the head sensor.
Do not force the robot to stop the movement, including follow, turn, and walk, etc.
Do not control the robot through a channel less than 1 m.
When the robot is dancing, avoid entering the robot within 1 meters range, to prevent
accidental injuries.
Do not place easy reflective objects near the charging pile, such as mirrors, smooth
ornaments, household and so on.
Do not long expose the robot in the burning sun, to avoid the shell aging.
Do not climb or stand on the robot, to avoid the robot dumping which may cause injury to
personnel.
Do not put your fingers into the robot neck, wheels, sensors and other space, to avoid finger
