User Manual - VPX-1701
39
No. Command
Description
Example
11
time
Display the current time.
>time
The current time is: 11: 57: 09 PM
12
show vs100
stats
Display DXLink transport
information (MSE values,
length, etc.).
>show vs100 stats
VS100 STATS: 50.
13
echo
Enable/disable echo of typed
characters.
>echo
Usage: echo [argument]
Arguments:
on
Enable echo of typed characters
off
Disable echo of typed characters
Example:
echo on
14
exit
Close this terminal session.
>exit
15
msg
Enable/Disable extended
diagnostic messages.
>msg
Usage: msg [argument]
This command allows system logs to be redirected to the terminal
session.
There are multiple log levels, which are described below.
Arguments:
on
Enable default [warning] system log level
debug Enable all system debug messages
info
Enable info system log level
warning Enable warning system log level
error
Enable error system log level
off
Disable system log output to terminal session
Example:
msg on
16
reboot
Reboot the device.
>reboot
17
set dns
Set DNS service
>set dns
--- Enter new values or keep current settings at the prompts ---
-- Current DNS #1 --
Change the current value? Y/N -> y
Enter DNS #1 192.168.2.1
-- Current DNS #2 --
Change the current value? Y/N -> Y
Enter DNS #2 192.168.3.1
Would you like to save the new settings? Y/N -> Y
New settings were saved...
18
dns list
Display the current dns.
>dns list
Domain Name:
amx.com
DNS List:
DNS #1:
192.168.2.1
DNS #2:
192.168.3.1
19
set
friendlyname
Set friendlyname
>set friendlyname
Please input friendlyname:
Old friendlyname:
New friendlyname: 111
Would you like to save this setting(Y/N) y
Setting is ok , you should reboot that make it effective
API Command List Instructions (cont.)