![background image](http://html.mh-extra.com/html/amx/vision-2/vision-2_operation-reference-manual_2938882025.webp)
Wiring and Device Connections
15
Vision
2
Operation/Reference Guide
Wiring and Device Connections
Master Server Rear Panel Connections
This section details the ports and connectors on the rear panel of the Vision
2
Master server.
LAN (RJ-45) Port
FIG. 4 describes the blink activity for the LAN 10/100/1000 Base-T RJ-45 connector and cable.
FIG. 2
Vision
2
Master server rear panel
Output port
LAN ports
Power connector
Some rear panel connectors are not available with certain solutions. See the
Overview
for information on the options included with your
solution.
FIG. 3
LAN (RJ-45) Port
FIG. 4
LAN connector / LEDs
ETHERNET
A
L
A
- Activity LED (yellow)
lights when receiving or
transmitting LAN
data packets
L
- Link LED (green) lights when
the LAN cables are connected
and terminated correctly.
To prevent multicast traffic from flooding your network, use LAN port 2 as the Vision
2
client side multicast interface.
Summary of Contents for Vision 2
