AMX TPI-PRO-4, Operation/Reference Manual

Page: 23 / 218

Wiring and Device Connections
9 TPI-PRO (Total Presentation Interface)
Wiring and Device Connections
Overview
The only physical differences between the TPI-PRO-4 and TPI-PRO-2 are the number of VIDEO/VGA Inputs
on the rear panel (and their associated Input LEDs on the front panel), and the number of USB Source
Interface ports on the rear panel.

The TPI-PRO-4 features four Inputs/Input LEDs and four USB Source Interface ports.

The TPI-PRO-2 features two Inputs/Input LEDs and four USB Source Interface ports.
Front Panel Components
Rear Panel Components
FIG. 4 Front Panel Components (TPI-PRO-4 shown)
Power switch/LED
Status LED
2 USB (Type-A)
Input 1-4 LEDs
Serial (Configuration) port
Input ports
Button - RESOLUTION
Button - TOUCH
Button - CALIBRATE
Button - SETUP
FIG. 4 shows the TPI-PRO-4, with four Input LEDs (which correspond to VIDEO/VGA
Inputs 1-4 on the rear panel). The TPI-PRO-2 has two Input LEDs, corresponding to
VIDEO/VGA Inputs 1-2.
FIG. 5 Rear Panel Components (TPI-PRO-4 shown)
RS-232 Touch Input port
Audio (Stereo) Output
Ethernet (RJ-45) port
Power Connector
VIDEO/VGA Input 4
VIDEO/VGA Input 3
VIDEO/VGA Input 2
VIDEO/VGA Input 1
VGA Output 2
VGA Output 1
USB (Type-B) Source
Keyboard/Mouse
Ports
1-4
USB (Type-A) Inputs
FIG. 5 shows the TPI-PRO-4, with four VIDEO/VGA Inputs and four USB (Type-B)
Source Keyboard/Mouse Ports. The TPI-PRO-2 has two VIDEO/VGA Inputs and two
USB (Type-B) Source Keyboard/Mouse Ports.