![background image](http://html1.mh-extra.com/html/amx/softkey-tx-sk/softkey-tx-sk_instruction-manual_2939359012.webp)
Pushbuttons and Menu Options
8
TX-SK+ SoftKey Transmitter
Testing
These instructions describe how to check transmission settings, transmission codes, and
downloading data to the TX-SK+.
Check transmission settings
If no transmitted wireless codes are received by the system when a button is pressed:
1.
Press MENU and top pushbutton simultaneously to open the SETUP page.
2.
Verify the IR or RF frequency is set correctly. If not, set the RF option to on. For TX-SK+
transmitters with the serial number 190-XXXX, set the IR option on. For transmitters with the
serial number 194-XXX-XXXX, set the IR option to 38 KHz or 455 KHz as required.
Check transmission codes
If specific transmit codes are not received or functions do work correctly:
1.
Press the MENU and top pushbuttons simultaneously to open the SETUP page.
2.
Set DISPLAY CHANNELS to ON.
3.
Press the desired pushbutton and note the device and channel number that appears on the
bottom line.
4.
Check AXCESS or SKDesign program to verify the device and channel number is correct.
Test downloading
If the PC screen indicates MASTER NOT PRESENT when you launch the AXCESS program or
IRLIB file program:
1.
Verify that MASTER PORT is ENABLED.
2.
Verify that the PC COM port baud rate matches the TX-SK+. All IRLIB files are sent as device
2.
3.
Verify the TX-SK+ is not in sleep mode.
The IR on/off and RF on/off settings only apply to codes transmitted to AMX
receivers. The IR or RF options should be set to off if the corresponding AMX
receiver is not used in the system. The TX-SK+ will transmit manufacturer's IR codes
regardless of the IR setting.
If the Transmit LED does not light when a pushbutton is pressed, the function may not
be present in the program (no code sent).