Instruction Manual - 4K/60 Scaler
Connection Modes
13
Connection Modes
ENDPOINT MODE:
The SCL-1 will change to Endpoint mode when it detects the presence of PR01-0808. Endpoint mode takes effect immediately.
A reboot is not needed.
Endpoint Mode Settings:
1. Copy EDID (always change EDID audio to 2CH).
2. Get input HDCP info from PR01-0808.
3. Follow PR01-0808 instructions to send CEC commands.
4. Use DIP switch on SCL-1 to set scaling output.
5. Receive API commands through RS232 port on SCL-1 to set other features.
6. Upgrade FWs via RS232 port and USB Type-A port.
STANDALONE MODE:
The SCL-1 will change to Standalone mode when it cannot detect the presence of PR01-0808. Standalone mode takes effect
immediately. A reboot is not needed.
Standalone Mode Settings:
1. EDID controlled by API commands through RS232 on SCL-1, copy EDID is default setting (always change EDID audio to 2CH):
•
3840 x 2160@60_2ch
•
3840 x 2160@30_2ch
•
1920 x 1200@60_2ch
•
1920 x 1080@60_2ch
•
1280 x 800@60_2ch
•
1280 x 720@60_2ch
•
1024 x 768@60_2ch
•
Copy(Default);
2. SCL-1 gets input HDCP information automatically.
3. SCL-1 controls CEC commands.
4. Use DIP switch on SCL-1 to set scaling output.
5. Receive API commands through RS232 port on the SCL-1.
6. Upgrade FWs via RS232 port and USB Type-A port.