Chapter 3: Configuration Options
30
N-Command User Manual
TABLE 15
IP Addresses Option Descriptions
Option
Description
Notes
IP Mode
Choose
Static
IP
or
Disable
. When set to
Static IP
, an IP
address, Netmask, and Gateway address must be
manually entered.
MAC address
View the MAC addresses for the Ethernet interface.
IP address
View/edit the current
IP
address
of the N8000 unit’s
Ethernet interfaces.
Netmask
View/edit the current
Netmask
for the N8000 unit’s
interfaces.
Static address
Add second and/or third
Static
IP
addresses.
These are general purpose IP addresses. Complicated
networks sometimes need multiple IP addresses on
N-Command. It is not used often.
Static 3rd is used for master/slave setup. If master/
slave is not needed, it can instead be used by a third
general purpose IP address.
Gateway
View the current
Gateway
address for the N8000 unit’s
Ethernet interfaces. When in
Static IP
mode, you may
enter a new
Gateway
address into this field.
DNS Servers
DNS server settings are required to reach domain
names on the Internet (such as when using an Internet
NTP service).
Ping
The
Ping
links allow you to test connectivity.
Cancel Changes button
Click to return all controls to the last saved
configuration.
Save Changes button
Click to save changes made to this page.