manualshive.com logo in svg

AMX PT10-ADD, Instruction Manual, Page: 3 / 28

Share
Download
AMX PT10-ADD Instruction Manual Download Page 3

Table of Contents

i

PT10-ADD Additional Camera Pan/Tilt System

Table of Contents

PT10-ADD Additional Camera Pan/Tilt System Package ......................................1

PT10-ADD System Components....................................................................................... 1

PT10-ADD Configuration with CMA-D2 (up to 25 m) ........................................................ 2

Installation and Wiring  .............................................................................................5

Preparing the AXB-PT10 for Communication.................................................................... 5

Mounting the AXB-PT10.................................................................................................... 5

Mounting and Balancing the Camera/Lens ....................................................................... 7

Wiring Information for the AXB-PT10 ................................................................................ 9

Wiring Guidelines ...................................................................................................................  10

Using the AXlink connector for data and power .....................................................................  10

Using the camera control RS-232 DB-9 connector ................................................................  11

Using a 2x1 AXlink connector for data ...................................................................................  11

Putting It All Together...................................................................................................... 12

Suggested Wire Types For Custom Cables .................................................................... 13

AXlink - (local-area, low-power requirement) .........................................................................  13

AXlink - (local-area, high-power requirement)........................................................................  13

AXlink - (wide-area, local-power supply)................................................................................  14

Recommended Lenses for Sony PosiTrack Systems ..................................................... 14

Troubleshooting .....................................................................................................15

General............................................................................................................................ 15

Lens................................................................................................................................. 15

Setup ............................................................................................................................... 15

Setting the RS-232 DIP Switch (S2)................................................................................ 16

Troubleshooting Tips....................................................................................................... 17

Sony Technical Support  ........................................................................................19

On the Web ..................................................................................................................... 19

Telephone Support.......................................................................................................... 19

Written Requests for Assistance ..................................................................................... 19

Summary of Contents for PT10-ADD





























Reviews:

No comments