Installing the Switch
17
NXA-ENET24 Hardware Installation Guide
3.
If installing a single switch only, refer to the
Connecting to a Power Source
section on page 23.
4.
If installing multiple switches, mount them in the rack, one below the other, in any order.
Desktop or Shelf Mounting
1.
Attach the four adhesive feet to the bottom of the switch (FIG. 9).
2.
Set the device on a flat surface near an AC power source, making sure there are at least two inches of
space on all sides for proper air flow.
3.
If installing a single switch only, refer to the
Connecting to a Power Source
section on page 23.
4.
If installing multiple switches, attach four adhesive feet to each one. Place each device squarely on top of
the one below, in any order.
FIG. 8
Installing the Switch in a Rack
FIG. 9
Attaching the Adhesive Feet