QUICK START GUIDE
NMX-WP-N1512
N-Series Windowing Processor, 4x1
© 2016 Harman. All rights reserved. Modero, AMX, AV FOR AN IT WORLD, HARMAN, and their respective logos are registered trademarks of
HARMAN. Oracle, Java and any other company or brand name referenced may be trademarks/registered trademarks of their respective companies.
AMX does not assume responsibility for errors or omissions. AMX also reserves the right to alter specifications without prior notice at any time.
The AMX Warranty and Return Policy and related documents can be viewed/downloaded at www.amx.com.
3000 RESEARCH DRIVE, RICHARDSON, TX 75082 AMX.com | 800.222.0193 | 469.624.8000 | +1.469.624.7400 | fax 469.624.7153
AMX (UK) LTD, AMX by HARMAN - Unit C, Auster Road, Clifton Moor, York, YO30 4GD United Kingdom • +44 1904-343-100 • www.amx.com/eu/
Last Revised: 8/2016
800-1512
REV: A
Specifications
Troubleshooting
Use the following list of possible issues and resolutions when troubleshooting your setup.
The N1512 is routed to a Decoder, but the Decoder is showing local play content.
• Is
Stream Output
enabled on the N1512?
• Does the N1512 have a Control IP address?
• Did you verify that no other devices have the same
Output Stream
number as the N1512?
• Is the Decoder properly assigned to the output of the N1512?
• Is the network configured appropriately for N1000 AV traffic?
The N1512 is routed to a Decoder, but the Decoder only shows four black screens.
• Are the source Encoders enabled?
• Do you have valid sources connected to all four U ports?
• Are the AV sources properly routed to windows of the N1512?
• Is the network configured appropriately for N1000 AV traffic?
• Did you assign unique IP addresses for each of the
U
ports? Guidelines for this setting
are outlined in FIG. 8.
You cannot access the unit properties after discovery.
Verify that the host PC has an IP address in the same range as the N1512. Double-click the name
of the unit to access its properties or use a web browser and access the unit via its IP address.
The web page is not loading or displaying correctly.
Retry using Firefox or Chrome (some versions of Internet Explorer are not supported).
Contact technical support at [email protected] or 256.461.7143 x9900 for any installation issues.
PRODUCT SPECIFICATIONS
Power
Requirements:
Internal power supply:
100-240 Volts AC (auto switching) power
supply
Dimensions
(HWD):
1.75” x 17.25” x 12” (4.5cm x 43.8cm x 30.5cm)
Weight:
7.15 lbs (3.24kg)
Certifications:
FCC, CE, and NRTL
Environmental:
Temperature:
32° to 104°F (0° to 40°C)
Humidity:
10% to 90% RH (non-condensing)
Overview
The NMX-WP-N1512 4x1 Windowing Processor allows you to display multiple real-time HD streams on a single screen simultaneously. Four
window streams (from N1000 Series Encoders) are connected to the four independent network ports labeled
U0
-
U3
. Each window stream
can then be cropped, scaled, and positioned according to stored presets (such as quad, picture-in-picture, etc.) or in any user-defined
configuration. The combined output AV stream is then routed as a single N1000 stream to one or more displays via a single output
network port (any of the ports
P0
-
P2
).
NOTE: For proper operation, all four U ports must be connected to active streams.
IMPORTANT: To avoid creating a network loop, never connect more than one P port to the same network segment.
To achieve larger stacked configurations, additional Windowing Processors can be used as input streams.
N1512 Windowing Processor Front View
N1512 Windowing Processor Rear View
