Room Switcher Detailed Configuration Options
35
N7142 User Manual
Mixing Tab
The
Mixing Tab
section of the
Audio
page is shown in
. Options are described in
Use this page to configure mixes for the following outputs:
The
Line
Out
1
and
Line
Out
2
columns correspond to the l
ineout audio outputs. These outputs are located on the rear of the
unit, under the
OUTPUTS
labeling, and are marked
1
and
2
.
The
Amp
Out
column corresponds to the active amplified audio output. These outputs are located on the rear of the unit, under the
left card slot and are labeled
60W
,
70V
100W
, and
100V 100W
.
FIG. 32
Audio Page: Mixing Tab
TABLE 18
Audio Page: Mixing Tab
Option
Description
Save Settings button
Saves current configuration.
Line Out 1
Slider choices made in this column affect Line Out 1.
Line Out 2
Slider choices made in this column affect Line Out 2.
Amp Out 1
Slider choices made in this column affect the amplified output.
Mic 1/2
Analog 1-6
Video 2, 3, 5, 6
These sliders define how much of input audio is put into the specified mix. For example, if
Mic1
is at
.1
, the mix
will include 10 percent of the microphone audio in the output.
